Advanced Settings

Back to Settings Wizard

The settings on this screen are only required in special circumstances. Most job configurations will use the default settings.

Autonumber Settings

SimpleIndex Simple Setup Configuration Wizard Advanced Settings Autonumber Settings

Autonumber fields can be used to add a unique sequential number to each scanned image or document. They are useful for Bates Numbers and Document Separators, or to just provide a unique identifier for each file.

Increment Event

When there is an Autonumber field present, this setting is used to determine when to increment the value.

Every Page

The number will be incremented on every page.

Blank Pages

The number is incremented each time a page under the Blank Page Threshold (0) is detected. This allows you to place blank pages between documents and create multi-page files automatically. This does not work with duplex scanning unless every back page has content on it.

Barcodes

The number is incremented each time a barcode field is recognized. Use Templates and Dictionaries to prevent unwanted barcodes from triggering the increment. The most reliable way to separate documents automatically is with barcodes.

If multiple barcode fields exist, any recognized field will trigger the barcode event.

End of Batch

The number is incremented at the end of each batch.

Every Max Pages

Increments the number every X pages using the Max pages per file. This is useful for scanning documents with a fixed number of pages.

First OMR Field

The first OMR field is used to increment the Autonumber. This will allow you to draw an OMR zone in the corner of the page and use a black felt-tip pen to mark the first page of each file. This is far faster than the traditional method of inserting document separator sheets and saves on printing costs.

The upper-left corner is recommended since it will have the same coordinates with any page size.

If multiple OMR fields exist, only the first one will trigger the Autonumber event.

First OCR Field

The first OCR field is used to increment the Autonumber. Use Templates and Dictionaries to indicate the text that will trigger the increment event. This is useful if there is some unique text on the first page of each document that can be recognized.

For best results, use the Fast OCR option for speed and enter multiple variations in the Template or Dictionary and enable the Max Errors option to prevent OCR errors from missing the document break.

Skip Deleted Pages

When pages are deleted, this can cause gaps in the numbering sequence. This option will skip the numbering sequence on deleted pages so the output does not have gaps.

Save Seed Value After Batch

Check to automatically save the current Autonumber value after each batch to preserve it between sessions.

Reset Seed Value After Batch

This option is used to save the seed value for an Autonumber field after each batch. By saving the configuration after each batch, the current value of the Autonumber is preserved when you exit SimpleIndex. If this option is unchecked, Autonumber fields will reset to their original value each time the job file is open.

Combine Pages into Documents After Processing

This allows document separation followed by indexing to occur in the same job. After files are separated using the Autonumber the indexing options of the job are applied.

Pre-Process and Post-Process

SimpleIndex Simple Setup Configuration Wizard Advanced Settings Pre-Process Post-Process

Pre-Process runs a program from the command line at the beginning of each batch. Post-Process runs a program from the command line at the end of each batch. You can enter any valid command line to launch another application or enter the path to a SimpleIndex configuration file to run multiple jobs in sequence.

The Wait on pre-process to finish before processing option will cause SimpleIndex to wait for the program to exit before beginning the batch. Uncheck this option to keep the program open during processing, which is useful for displaying operator instructions or launching support applications.

Several optional variables are available to allow you to pass batch information to the program you are running. When these variables are inserted in your command line, they are automatically replaced with the values they represent when the command line is executed.

• %IDXFILE% - full path of the index file generated for this batch
• %BATCHNAME% - the unique ID for this batch, in the format YYYY-MM-DD@HHMMSS
• %OUTPUTFOLDER% - the location of the images for this batch
• %USERID% - the name of the user logged in to SimpleIndex
• %PASSWORD% - the password entered in the SimpleIndex logon screen
• %FIELD#% - where # is the number of a valid field - substitutes the value of this field that was assigned to the first image in the batch

Advanced Indexing Options

SimpleIndex Simple Setup Configuration Wizard Advanced Indexing Options

Stop Forwarding Values at End of Each Input File

When processing several multi-page input files, document-level indexes usually apply to a single file. If OCR or Barcode recognition fails on a file, incorrect index values may be carried forward from the previous file if the Forward option is checked. Check this option to clear index values at the end of each document. This option is valid only when processing multi-page images with the Split multi-page input files option selected.

Save Job File After Each Batch

Automatically re-saves the configuration file at the end of each batch. This is used to preserve Autonumber field values and the Last Batch Time setting between sessions.

Copy First Page of Each File to Backup Folder

Sends a reference copy of the first page of each output document to the backup folder

Move Files with missing Values to Backup Folder

Output files that contain “MISSING” as one of the indexes used for file naming are placed in the Backup folder rather than in the Output folder. This allows processes that work with the output files (say a DMS ingest) to proceed and the exceptions can be dealt with separately.

Substitute This Value when a Field is Empty

If a field used to generate the filename is missing, this text is substituted for the blank value. This makes it easy to locate files where one or more fields are not recognized automatically by OCR or barcode recognition in an unattended process.

If you are exporting field values to a database, you must be sure that this value is valid for all field types you are exporting to. The initial value of “DEFAULT” will substitute the following values for the three basic data types:

• Numbers 0
• Dates 2000-01-01
• String/Char MISSING

To configure individual values for empty fields, use a Fixed field) instead. For example, to configure a 3-digit OCR field to use the value “999” if there is no result, use the following settings:

Field Type Template Field #1 OCR ### Field #2 Fixed %FIELD1|999%

Use Field #2 to generate the filename or export the correct value to a database.

Format All Valid Dates Using This Pattern

The format pattern selected here is used to reformat all valid dates regardless of the field type. This is useful for reformatting dates extracted from OCR text or barcodes.

Forward This Field Value to Next Batch

Specify a field whose value does not change between batches here. The value for this field from the previous batch will be the default value for the next batch.

Required documents Auditing Field

SimpleIndex Simple Setup Configuration Wizard Advanced Indexing Options Index Field Audit

This option is very useful when scanning batches that have several specific document types that must be present in each. A typical example of this is a front desk scanner in a doctor’s reception area that collects and scans the medical history, insurance, and other required documents for each patient.

By selecting a List field in this option, the form below will appear upon completion of the batch. Items in the list that are present are listed in green, while missing files are listed in red. A Scan button is present to allow the user to automatically scan and index the missing file.

With this option selected, the user must scan and index an image for each value in the field list or enter a justification for why the file is not present.

Advanced Logging Options

SimpleIndex Simple Setup Configuration Wizard Advanced Logging Options

Strip Leading Slash \ from Path

By default, relative paths are output with a \ as the first character. If there are no subfolders, the filename is output with a \ in front of it. Some applications will require that just the filename be output. Check this option to enable that.

Use Forward Slashes / in File Paths

When the destination database is used on a website or UNIX file system, forward slashes should be used instead of the default backslash. This lets you link images indexed with SimpleIndex directly to a web database without having to modify the output.

Include File Path Field

This option is checked by default and causes the output file path to be exported automatically after the last index field. In some applications, only the index data is relevant, or you may need the output file in a specific position within the file. Uncheck this box to disable automatic output of the export file path.

You may use a Fixed field to output the File Path, OCR File Path, Page Count, and Batch ID values in specific positions within the file.

Include Page Count & Batch ID Fields

By default the last 2 fields in the index log are the Page Count and Batch ID. These fields may not be needed and can prevent the file from importing properly, so uncheck this option to leave them out of the Index log.

Output File Path, Page Count & Batch ID First

When checked, the image file, batch ID, and page count is output first, and index field values are output last. This lets you have a variable number of index fields while keeping the image path in the same position.

ID Field

Selecting a field in this option will cause the value for this field to be used in the Batch log filename. If multiple values exist in the batch, only the first one is used to identify the log.

Source

These fields are used as identifiers for the location, project, user, or workstation that processed the batch. Pre-defined values exist for the computer’s Network ID, SimpleIndex User ID, or both. It is also possible to enter any other value you wish and it will appear in the Batch ID and/or log filenames.

If multiple users are saving logs to a common network share, use this field to ensure each user creates unique log filenames.

Set the source to Output File to create an index log file for each exported file, using the same folder and filename. This setting overrides the other log file naming settings.

Batch Log Table

The Batch Log Table is a table with several specific fields that store information about user productivity. For each batch that a user completes, a record is created that stores information about how long it took to index the batch. The Batch Log Table must contain the field names and data types listed in the table below:

Caption text

Field Name	Data Type	Description
Primary Key	AutoNumber	This field can be any name and any auto-generated data type.
BatchID	String	Stores the ID string for each batch.
Username	String	The User ID for the person that indexed the batch.
BatchStart	DateTime	Starting date and time for this batch.
BatchEnd	DateTime	Ending date and time for this batch.
BatchTime	Float/Single	Decimal number representing batch completion time in minutes.
BatchPages	Integer	Number of pages in the batch.
BatchFiles	Integer	Number of files in the batch.
Revision	String	Revision Level for the batch.
Job File	String	Job configuration file name.

Batch ID Field

In Insert mode, the selected field is set to the Batch ID generated using the values from the Logging tab. In Update mode, each user is assigned batches according to the values in this field. This is important to ensure that similar documents are all indexed by the same user. When used in conjunction with the Batch Log Table, a highly detailed production log is generated automatically for each user.

The Batch ID Field is optional. If unused, users in Update mode are assigned the next X images, where X is the value of the Max Files/Batch setting under the File tab. The Batch ID Field is required if the Batch Log Table is used for productivity tracking.

Advanced Database Options

SimpleIndex Simple Setup Configuration Wizard Advanced Database Options

Insert New Record if No Match

When using Match and Attach mode, the default behavior is to give an error if no matching record is found. Check this option to automatically insert a new record in the database if there is no record matching the selected field values.

Allow Spaces in Field Names

Databases that support spaces in field and table names use brackets to enclose these names. Other databases do not use brackets. This setting is set automatically when you use the New Data Source wizard.

Disable max Rows in Database Queries

Some databases do not allow query size to be limited using the MaxRows parameter. An example of this is FileMaker. Check this option to disable query sizing.

Use Streams for Binary Database Objects

Changes how binary objects are stored and retrieved from the database. Use the default for this option (selected) unless told to change it by support.

Date Delimiter

This is used for compatibility in date conversions with different databases. Some databases use “#” to indicate dates, others use the single quote “ ’ “. This setting is set automatically when you use the Select a Data Source wizard.

User Logon Options

SimpleIndex Simple Setup Configuration Wizard Advanced Settings User Logon Options

Enable logons to require users to enter a user name and optional password when they open this job file. This allows you to track productivity, logon to database servers, encrypt and decrypt PDF files.

Add each user ID to the list to display them in a drop-down list on the logon screen. Leave the list blank to have the user enter a user ID manually. Use the Import button to load a list of user IDs from a text file. The text file is a simple list with one user ID per line.